Hisense HL55T39PZLN3D, User Manual, Page: 17 / 46

Initial Setup
Turning the TV On for the First Time
1. Connect the mains cable to the mains socket after you have
completed all the connections.
2. Switch on the POWER ON/OFF at the bottom of the TV.
Then the TV switches to on mode.
Always disconnect the TV from the mains socket when not in
use for a long period of time.
To completely disconnect the mains power, please remove the
mains plug from the mains socket or switch off the
POWER ON/OFF switch.
3. The first time you turn the TV on, it will go straight into the
Setup Wizard -1 menu.
4. Press / buttons to select the local time zone where you
operate the TV and press to confirm.
5. Then press ► button to enter the Setup Wizard -2 menu.
Or you can press Exit button to exit the wizard.
6. Press / buttons to select Scan and press ► button to
enter the next wizard and the TV will start to search the
programs automatically.
All available TV channels are stored This display shows the
progress of the tuning and the number of channels found
You can press ◄ button to return to the last wizard.
If you want to cancel the scan , please press Exit button.
7. After scan, the wizard will display congratulations and then
you can press button to exit the wizard.
▲ ▼
▲ ▼
OK
OK
.
.
Setup Wizard -1
VIC
QLD
SA
WA
TAS
NT
NSW/ACT
Please set the local time zone for your TV set:
Select Next Exit
EXIT
Setup Wizard -2
Skip Scan
Scan
Channel Installation:
Select Next Exit
EXIT
Back
Setup Wizard -3
Channel Installation:
Status: Scanning...
ATV Program Installed: 4
DTV Program Installed: 3
Cancel
EXIT
Setup Wizard -4
Congratulations!!
Completed Initial Setup.
Please press [OK] to exit the wizard.
Back
17
To mains socket