Hisense H120RME, User'S Operation Manual

Page: 9 / 51

rubber supporting pad
screw
lower base cover
1.Tilt appliance to find screw hole on the
left of lower base cover.
2.Put screw into the hole of rubber
supporting pad.
3.Make screw in alignment with the hole
on lower base cover . Fasten rubber
supporting pad to the base cover firmly
by a cross screw driver (self-provided).
Leveling
The appliance should be level in order to
eliminate vibration. To make the appliance
level, it should be upright and both
adjusters should be firmly contacted with
the floor. You can also adjust the level by
screwing out the appropriate level
adjusterat the front (use your fingers or a
suitable spanner).
Electrical connection
Caution! Any electrical work required to
install this appliance should be carried out
by a qualified or competent person.
Warning! This appliance must be earthed.
The manufacture declines any liability
should these safety measures not be
observe.
cross screwdrawer
Hisense Refrigerator
9