Hisense H120RME, User'S Operation Manual

Page: 14 / 51

Reversing the door
The side at which the door opens can be
changed
, if the installation site
requires.
from the right side (as supplied)
to the left side
Tools you will need:
1. 8mm socket driver.
2.Cross-shaped screwdriver.
3.Putty knife or thin-blade screwdriver.
Before you start lay the refrigerator on it’s
back in order to gain access to the base, you
should rest it on soft foam packaging or
similar material to avoid damaging the cooling
pipes at the rear of the refrigerator.
1.Remove the upper hinge core, transfer it to
left side and tighten securely, then put it in a
safe place.
2. Remove both adjustable feet
、
the bottom
hinge bracket and the
by unscrewing the bolts, then fit them on by
the following pictures.
rubber supporting pad
3. Replace the lid by fitting the upper hinge
core into the upper door's hole, securing it
with the 2 screws. Replace the screw
covers.
Warning!
When changing the side at which the
door opens, the appliance must not be
connected to the mains. Remove plug
from the mains beforehand.
Hisense Refrigerator
14