20
ENGLISH
•
RGB only:
View images based on default settings or choose the color red,blue or green.
Apply Picture Settings:
Adjust current picture mode to apply to
All Sources
or just
Current Source
.
Reset:
Reset current picture settings to factory mode.
Sound
System sounds:
Open the default system sound.
Sound Mode:
Select a preset sound mode to suit the type of content you are listening to:
Standard
,
Theater
,
Sports
,
Music
,
Speech
and
Late Night
. Sound mode options may vary depending on models.
Once you choose the mode, you can adjust the audio based on the following settings:
Audio Output:
Select the speakers which you want to use:
TV Speaker
,
ARC
or
Bluetooth.
TV Speaker:
Turn on or off the TV speaker.
If
ARC
or
Bluetooth
is selected in
Audio Output
, configuration here is
unavailable.
Dolby Atmos:
You can turn on the Dolby Atmos On.
Wall Mount Setup:
Automatically optimize the sound based on the position of the TV.
Advanced Settings:
Tune the audio settings and quality of the TV.
•
Balance:
Adjust the left and right speaker strength to optimize audio for a specific location.
•
Auto Volume Control:
Turn Auto Volume Control on or off.
•
Digital Audio Out:
Select the digital audio output format that best suits the audio device type.
•
Digital Audio Delay:
Adjust the digital audio output delay time to sync sound from an external speaker with the
images on the TV.
•
Lip Sync:
Synchronize the displayed image with the audio output.
•
Equalizer:
Boost the volume at different frequencies.
•
Preferred Audio Language:
Set the default audio output language for the type of digital broadcast content that you’re
viewing.
•
Headphone Mode:
Disable the TV speaker when you are using a sound bar, ARC or any other external audio
amplifiers.
•
Headphone Volume:
Change the way audio is sent through the type of device that's connected to your TV Audio Out
port.
Reset:
Reset current audio settings to factory mode.
Channels
Tuner Mode:
Select if you receive TV channels over the air (antenna) or through a cable set top box.
Auto Channel Scan:
Automatically scan for channels.
Manual Scan:
Type in a channel to add it manually to your TV.
Channel Skip:
Skip selected channels from your Channel List.
Favorite List:
Add Channels to your Favorite List.
Parental Control
The Parental Control setting allows you to block content that is not appropriate for children to watch.
Turning Parental Control On
1. Press the
[OK]
button on your remote to turn
Parental Control
on.
2. Create PIN window displays. Using the number buttons on your remote, create the password.
You will see the other Parental Control settings change from a greyed out state to highlighted. When this occurs, begin
adding other settings to the
Scheduled blocking
,
Channel Block
,
Program Block
,
Input Block, Change PIN
or
Reset
features.
Scheduled blocking:
Block all selected channels and programs during selected periods of time.
