Viewing Alarm Logs
MR01 and AR01 are respectively the latest information of the manual reset alarm and
auto reset alarm.
Display
Procedures
Press down the <Enter> for 2 seconds, and release it to activate the Menu mode.
Press <Plus> or <Minus> to
navigate to the
menu, and
then press <Enter> to confirm.
By default, auto reset alarm
“AR” will be displayed on the
To view auto reset alarms generated, press <Enter> to continue when “AR” is displayed.
To view manual reset alarms, press<Minus> or <Plus> to navigate to the “MR” group, and then
press <Enter> to continue.
By default, the first manual reset alarm “MR01” will be displayed as follows. Press <Enter> to view
the first manual reset alarm code.
Or, press<Minus> or <Plus> to view other numbered alarms, and press<Enter> to view the specific
code.
If no alarm is generated, the
word
“NONE”
will
be
displayed.
Continuously press <Exit> to exit out of the current level, and back to the normal running mode.
Acknowledging and Resetting Manual Reset Alarms
Any alarm detected by the system, either an auto reset alarm or a manual reset alarm
will be displayed on the LCD. However, only manual reset alarms require user’s
acknowledgement and reset.
To clear the alarm press <Enter> to acknowledge the alarm.
If the alarm status is cleared, the corresponding device icon and alarm icon
that
are flashing will accordingly disappear.
Restart the system, as appropriate.
Warning and Alarm
