Hirschmann VIP multimedia LAN adapter, User Manual

Page: 33 / 67

Video over IP
Manual
34
Video bandwidth n/a R The transmission rate, i.e. the video
bandwidth is controlled from the
receiving end. Therefore this setting
only applies to
VIP
receivers. The
data rate may be entered inside
the range 1 kbit/s up to 1 Mbit/s.
Camera name none T In addition to the unit name, the
camera name aids the user in the
identification of the location or the
visible scene.
Name stamping off T The unit name as well as the
camera name may be stamped
into the video frame. There is a
choice of upper or lower left hand
corner for display of the name
information inside the video frame.
Time stamping off T Similar to the name stamping, date
and time information may be
stamped into the live video frame
at either the upper or lower right
hand corner. Note that the stamp-
ing takes place at the transmitter
before the actual coding takes
place. Therefore the name and the
date/time information are an inte-
gral part of the coded and trans-
mitted data stream.
Input source Camera T In order to facilitate the connec-
tion of video tape recorders as
video sources the input may be
switch from the default camera
position to VCR. VCRs do require a
more relaxed setting of the internal
PLL, due to jitter caused by the
mechanical components.
Output standard PAL R The video standard to be used at
the output of receiver units may be
selected to be PAL or NTSC com-
patible.
VIP
transmitters automati-
cally adapt to the standard of the
connected video source.
Configuration Item Default Settings Type Description
Table 3. Video Settings