Hirschmann VIP multimedia LAN adapter, User Manual

Page: 16 / 67

Quick Installation Guide 17
Step 3: Connecting Power
After connecting the video source or the monitor and the LAN cable to the
unit, the power adapter has to be attached to the
VIP
. Plug the primary
side into the wall outlet and the secondary side with the small clip into the
unit.
When the power adapter is connected correctly to the
VIP
, the green
power LED at the front side is lit constantly.
Key:
1 = UTP (10BASE-T) LAN connection to hubs, network, PCs
2 = UTP Cat5-cable
3 =
VIP - VTx
transmitter or
VIP - VRx
receiver
4 = AC plug power adapter
Figure 7. Connecting Power
2 1 3 4