OCTOPUS 8M/16M/24M/OS32
Release 10 05/2012
29
100/1000 Mbit/s FO connection
(SFP, IP67-V1 connector based on IEC 61076-3-106,
variant 1)
100/1000 Mbit/s F/O ports enable the connection of terminal devices or
independent network segments according to the IEEE 802.3 100BASE-
FX/1000BASE-SX/1000BASE-LX standard.
These ports support:
Full duplex mode
State on delivery:
OCTOPUS OS32-08xx02O6O6TPEPHH:
The SFP slots are prepared for the use of SFP modules
(see page 17
“Installing the SFP modules (optional)”)
:
OCTOPUS OS32-08xx02O6O6TPEPH1:
The SFP slots are occupied with Fast Ethernet transceivers M-Fast
SFP-SM/LC EEC.
2.2
Display elements
After the operating voltage is set up, the software starts and initializes itself.
Afterwards, the device performs a self-test. During this process, various
LEDs light up. The process takes around 60 seconds.
Figure 6: Display elements
1 - Port status LEDs (here: for ports 1 to 4)
2 - Device status LEDs
Device state
These LEDs provide information about conditions which affect the
operation of the whole device.
OCTOPUS 16M-2FX
1
2
Summary of Contents for OCTOPUS 16M-8PoE-2FX
Page 4: ...4 OCTOPUS 8M 16M 24M OS32 Release 10 05 2012...
Page 44: ......
