Installation EAGLE20/30
Release 12 03/2021
25
1.5
Ethernet ports
You can connect end devices and other segments to the device ports using
twisted pair cables or optical fibers (F/O).
You find information on pin assignments for making patch cables here:
See “10/100 Mbit/s twisted pair port” on page 25.
1.5.1
10/100 Mbit/s twisted pair port
This port is an RJ45 socket.
The 10/100 Mbit/s twisted pair port allows you to connect network
components according to the IEEE 802.3 10BASE-T/100BASE-TX standard.
This port supports:
Autonegotiation
Autopolarity
Autocrossing (if autonegotiation is activated)
100 Mbit/s half-duplex mode, 100 Mbit/s full duplex mode
10 Mbit/s half-duplex mode, 10 Mbit/s full duplex mode
Delivery state: Autonegotiation activated
The port casing is electrically connected to the front panel.
1.5.2
100/1000 Mbit/s F/O port (optional)
This port is an SFP slot.
The 100/1000 Mbit/s F/O port allows you to connect network components
according to the IEEE 802.3 100BASE-FX/1000BASE-SX/1000BASE-LX
standard.
This port supports:
Full duplex mode
1.5.3
100/1000 Mbit/s twisted pair port (optional)
Note:
The following information applies only to device variants with
HiSecOS, software versions 01.2.00 and higher.
Pin
Function
1
RD+
Receive path
2
RD
−
Receive path
3
TD+
Transmission path
6
TD
−
Transmission path
4,5,7,8
—
Table 6:
Pin assignment of the 10/100/1000 Mbit/s twisted pair port, RJ45 socket,
10/100 Mbit/s mode
1
2
3
4
5
6
7
8
Summary of Contents for HiSecOS EAGLE20
Page 64: ......
