Hirschmann EAGLE 20 Series, Reference Manual

Page: 14 / 40

14
CLI EAGLE 20
Release 5.0 08/2010
2.3 CLI via the V.24 port
A serial interface is provided on the RJ11 socket (V.24 interface) for the local
connection of an external management station (VT100 terminal or PC with
corresponding terminal emulation). This enables you to set up a connection
to the Command Line Interface (CLI) and to the system monitor.
The socket housing is electrically connected to the housing of the device.
Figure 5: Pin assignment of the V.24 interface and wiring to the DB9 connector
You will find a description of the V.24 interface in the “User Manual
Installation”.
Connect the device to a terminal via V.24 or to a “COM” port of your PC
using terminal emulation based on VT100, and press any key.
After the connection has been made successfully, a window for entering the
user name appears on the screen.
VT 100 terminal settings
Speed
9,600 Baud
Data 8 bit
Stopbit 1 bit
Handshake off
Parity none
Pin 1
Pin 1
Pin 8
Pin 5
Pin 6
RJ11 DB9
2
3
5
1
2
3
4
5
6 CTS
n.c.
TX
GND
RX
RTS