Hirschmann EAGLE 20 Series, Reference Manual

Page: 11 / 40

CLI EAGLE 20
Release 5.0 08/2010
11
Figure 1: PuTTY input screen
In the
Host Name (or IP address)
input field you enter
the IP address of your device.
The IP address (a.b.c.d) consists of four decimal numbers with values
from
0 to 255. The four decimal numbers are separated by a point.
To select a connection type, click on
SSH
under
Connection type
.
After selecting and setting all the required parameters, you can set up the
connection via SSH.
Click “Open” to set up the connection to your device. Depending on the
device and the time at which SSH was configured, it can take up to a min-
ute to set up the connection.
When you first login to your device, towards the end of the connection setup,
PuTTY displays a security alert message and gives you
the option of checking the fingerprint of the key.