background image

2

Inhalt

 

 

Seite

 1.  Pumpenkopfmontage .................................................................3

  2.  Pumpenschlauch auswählen und einlegen ...............................5

  2.1  Auswahl des Schlauchmaterials .................................................6

  2.2  Schlauch einlegen .......................................................................6

  2.3  Schlauch- und Kassettenmontage..............................................8

  2.4  Schlauch- und Kassettenmontage bei Pumpenantrieben 

 

   

mit automatischer Schlaucherkennung .......................................12

  2.5  Herausnehmen der Schlauchkassetten ....................................13

 2.6 Schlauch schonen und 

 

   

ausnutzen der maximalen Lebensdauer .....................................14

   2.7  Einlaufzeit der Schläuche .............................................................15

  2.8  Pumpen gegen Druck ...................................................................15

 2.9 Fließraten ......................................................................................16

Content

 

 

Page

  1.  Pump head assembly .................................................................3

  2.  Selection and insertion of the pump tube .................................5

  2.1  Selection of tube material ..........................................................6

  2.2  Tube insertion  ............................................................................6

  2.3  Tube and cassette fitting ............................................................8

  2.4  Tube and cassette fitting for pump drives 

 

   

with automatic tube identification .............................................12

  2.5  Removing the tube cassettes ...................................................13

 2.6 Tube care and exploitation 

 

   

of maximum service life ..............................................................14

   2.7  Running-in phase for tubes ..........................................................15

  2.8  Pumping against pressure ...........................................................15

  2.9  Flow rates ......................................................................................16  

Summary of Contents for rotarus

















Reviews: