R X 2 5 0 0 D U A L A S S E M B L Y I N S T R U C T I O N S & M A N U A L
3 2 - 0 0 1 9 R E V . A
6
Product Assembly
STEP 2
Parts:
•
RX2500D Main Vertical Post
– 2x
•
RX2500D Base
– 2x
•
RX2500D Base Binding Plate
– 1x
•
RX2500D Base Back T-Support
– 1x
•
RX2500 Seat Assembly
– 2x
•
RX2500D Stiffening Bracket
– 1x
Hardware:
•
Socket
Screw 5/16”-18 x 1.5” – 18x
•
Socket
Screw 5/16”-18 x 1” – 12x
•
Washer 5/16” – 30x
Tools:
•
3/16 or 1/4
Hex Key for 5/16” Socket Screw
2-1 Place 2 Base assemblies and Base Binding Plate on the floor as shown
below. Binding Plate is installed on top of the Base assemblies and joins
them together in the next step.
2-2 Attach both RX2500D Main Vertical Posts to Base as shown by placing
them on top
of the Binding Plate using 5/16”-18 x 1.5” Socket Screws with
Washers. Do not tighten hardware completely.
2-2.1 Attach speed sensor cable (3.5mm mono plug) as shown
2-2.2 If applicable attach USB power cable as shown
2-3 Install Stiffening Bracket as shown
using 5/16”-18 x 1” Socket Screws with
Washers. Do not tighten hardware completely.
2-4 Attach RX2500 Seat Assembly to RX2500D Bases as shown and
completely tighten hardware (use screws and washers).