R X 2 5 0 0 D U A L A S S E M B L Y I N S T R U C T I O N S & M A N U A L
3 2 - 0 0 1 9 R E V . A
9
Product Assembly
STEP 3
Parts:
•
Assembly from STEP 2
•
Smart Device Bracket with
Hipervision Module
•
Security Bar
Hardware
:
•
Socket
Screw 5/16”-18 x 1” – 4x
•
Washer 5/16” – 4x
•
Torx Screw #6-32 x 3/8
– 2x
Tools:
•
3/16 or 1/4
Hex Key for 5/16” Socket Screw
•
Torx T15 Driver
3-1 Refer to illustration. Install Smart Device Bracket with Hipervision Module as
shown using screws and washers.
3-1.1 Route sensor cables coming from the mid-section of the
Main Mast Assemblies and connect them as shown
3-1.2 Route Power Cable as shown
Note: Do no close opening at the bottom of the
Hipervision module until all connections are tested
3-2 Fully tighten all screws from STEP 2 and STEP 3
RX2500D Base
