manualshive.com logo in svg

HiP 25D815, Instructions-Parts List Manual

Share
Download
HiP 25D815 Instructions-Parts List Manual Download Page 7

Installation

3A6828B

7

Updating the Software

The PT2020 has a USB port on the front cover for 
updating the software, and for importing and exporting 
data.

NOTE:

 Settings and pressure test data may be lost 

when updating software. See 

File Management

, on 

page 24, for saving and restoring settings and pressure 
test data.

Getting the Software

1. Contact HiP customer assistance for the latest soft-

ware.

2. Move the “Default_PPC7x” folder and “arnbcfg.xml” 

file to the root directory of a USB drive.

Installing the Software

1. Follow the 

Pressure Relief Procedure

 on page 11.

2. Turn the disconnect switch to the OFF position. 

(See F

IG

. 1 on page 8.)

3. Insert the USB drive with the new software into the 

USB port on the front cover of the enclosure. (See 
F

IG

. 1 on page 8.)

4. Turn the disconnect switch to the ON position.

5. Wait for the PT2020 to update. Updates can take up 

to five minutes. Do not turn the system off during the 
update, as this can prevent the unit from operating. 
The Home screen will appear once the update is 
complete.

6. Turn the disconnect switch to the OFF position.

7. Remove the USB drive.

Summary of Contents for 25D815



































Reviews:

No comments

Brands by name

Popular brands

Load more brands