12
a
b
c
CLT-AY-61
21
190
38.5
100
106
φ20
φ18
10
CLT-AY-81
30
260
35
150
154
φ23
φ20
14
Power supply
model number
rubber foot
Dimensions
a
b
c
d
e
●
Standard specifications of the power supply
.
1.
The output voltage is adjustable from HI (approx.30V) to LOW (approx.17V) positions on the
voltage adjusting Dial.
2.
The circuit is designed to give priority for the reset function. So the screw driver will be
stopped by the input of RESER at any time. Any condition.
3.
The counter switch* which can give the maximum 3 times of impact tightening in accordance
with the screw tightening conditions, is provided.
4.
Input system is selectable.
1.
Starting system : Pulse input starting system or Reading starting system
2.
Input system: Open collector Input (Low active) or Voltage input (High active).
3.
Screw driver : Hios-product(HH/XH) or Nittoh Seikou-product(HH/XN) are applicable
Each selection or adjustment is changeable even after purchase. (See the instructions)
5.
Monitoring Input/Output function is possible with the function LED on the front panel.
(Provided LED are: STRAT, PLAYING, CL,PULSE FINGISH RESET and so on)
6.
The inlet with fuse holder is adopted.
*: The counter switch is designed to select the number of impact time when the torque value of
screw driver is increased. Select the time according to tightening conditions.
Options
The power unit have two kinds of options as follows.
2WV: The control of low rotation (5 to 15V) by an external operation is possible. 2WV LED lights
on during the LOW rotation. (The function will support the screw tightening.)
REV: The control of REV rotation by an external operation is possible. REV LED lights on during
the REV rotation.
Please order the options at the same time of purchase.
Installing Option after purchase is NOT available.
