manualshive.com logo in svg

Hioki SP7001, Instruction Manual

Share
Download
Hioki SP7001 Instruction Manual Download Page 48

44

 

Precautions when shipping the product

IMPORTANT

When shipping the product, do not disconnect the SP9200/SP9250 Signal Probe from the 

SP7001/SP7002 Non-Contact CAN Sensor. Doing so may soil or degrade the connectors’ 

contacts, adversely impacting signal detection.

When sending the product to be repaired, attach a description of the issue.

Cleaning

IMPORTANT

Remove any dirt from the Signal Probes’ detection electrodes and guard hooks by wiping them 

lightly with a clean, dry industrial-use cotton swab. The presence of any dirt or other foreign 

material on the Signal Probes’ guard hooks or detection electrodes may adversely affect signal 

detection. Fibers and other material that get into the Signal Probes’ moving parts could cause 

them to malfunction.

If the product becomes dirty, moisten a soft cloth with water or neutral detergent and gently wipe it 

clean.

HIOKI SP7001A961-01

Summary of Contents for SP7001





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands