manualshive.com logo in svg

Hioki SP7001, Instruction Manual

Share
Download
Hioki SP7001 Instruction Manual Download Page 27

23

Connecting the Signal Probes to the CAN bus

Example of a poorly positioned cable

If the grip has not been tightened sufficiently, the detection electrode will move when the Signal 

Probe’s sleeve is pulled. The Signal Probes are susceptible to the effects of nearby conductors 

(cables). Take care to keep the Signal Probes away from wires and other conductors since the 

magnitude of the effect is greater the closer the conductor is to the guard hook opening.

Guard hook

The detection electrode 

will move if the grip is not 

tightened sufficiently.

Grip

Sleeve

Removing probes

To loosen a probe, rotate the grip while pulling it towards you.

The probe is designed so that while it is locked in place, the grip will be locked so that it cannot be 

rotated (to prevent inadvertent loosening).

1 

Rotate the grip while pulling it towards you.

The guard hook will open.

2 

Remove the cable under test.

HIOKI SP7001A961-01

Summary of Contents for SP7001





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands