33
Setting the Pulse Mode
Setting output
1
2
1
Select the
[Output]
setting.
2
Press a function key (
F1
to
F5
) or select a button with the mouse.
Off
Does not output a waveform, regardless of the state of Generator Control
(p.71).
On
Outputs the set pulse waveform when Generator Control (p.71) is
[RUN]
.
Test
Generates test output of the set waveform.
After selecting [Test]
Cancel test
Pressing
(
TRIG.
SET
) stops test output.
This test mode does not provide functionality for judging test results with the unit. You are
responsible for determining whether the set pulse waveform is being properly output during the
output test.
A HIGH-level signal may be output momentarily when the power is turned on or off.
5
Setting Pulse and Pattern Output (MR8791)
www.
.com
1.800.561.8187
