Hioki MR8790, Instruction Manual, Page: 2 / 134

Contents
i
5
Setting Pulse and
Pattern Output
(MR8791) 29
5.1 Setting the Mode ............................ 29
5.2 Setting the Pulse Mode .................. 30
„ Setting the frequency ..................................30
„ Setting the duty ...........................................31
„ Setting the output type ................................32
„
Setting output ..............................................33
5.3 Setting the Pattern Mode ............... 34
„ Setting the output type ................................34
„ Setting the pattern to use ............................35
„ Method for registering a pattern ..................36
„ Setting the clock frequency .........................38
„
Setting output ..............................................39
6
Sweep Setting (U8793) 41
6.1 Selecting the Sweep Type ............. 41
6.2 Setting the Start Value ................... 42
6.3 Setting the End Value .................... 43
6.4 Setting the Sweep Time ................. 44
7
Arbitrary Waveform
Settings (U8793)
45
7.1 Setting the Waveform Type ........... 45
7.2 Registering a Waveform ................ 46
„
Registering data measured with a
Memory HiCorder .......................................47
„
Registering data created with the
SF8000 Waveform Maker ...........................49
7.3 Setting the Clock Frequency ......... 51
7.4 Setting
Amplitude Adjustment ...... 52
7.5 Setting the Offset ........................... 53
7.6 Setting the Delay ............................ 54
7.7 Setting the Number of Loops
(When Sweep Is Disabled) ............. 55
7.8 Setting the Filter ............................. 56
7.9 Setting the Output to ON or OFF .. 57
7.10 Setting Behavior When Output
is OFF .............................................. 58
8
Program Settings
(U8793) 59
8.1 Switching to the Program
Settings Screen .............................. 59
8.2 Editing the Program ....................... 60
„ Opening the Edit screen .............................60
Introduction ................................................ 1
Verifying Package Contents ..................... 2
Safety Information ..................................... 2
Operating Precautions .............................. 5
1
Overview 7
1.1 Features ............................................ 7
1.2 Part Names and Functions .............. 8
1.3 Inspecting the Unit before Use ....... 9
2
Connecting the Unit 11
2.1 Installing the Unit in and
Removing the Unit from
a Memory HiCorder .........................11
„
Installing the unit ......................................... 11
„ Removing the unit ....................................... 11
2.2 Connecting Cables to the
Output Terminals ............................ 12
2.3 Output Terminals ............................ 13
2.4 Connecting Wires to the
External Control Terminals
(U8793) ............................................ 14
3
Signal Generation
Settings Screen
(Generator Screen)
15
„ Method for copying and pasting channel
settings .......................................................16
4
FG Waveform Settings
(U8793, MR8790)
17
„ Method for setting values ............................18
4.1 Setting the Waveform Type ........... 20
4.2 Setting the Frequency ................... 21
4.3 Setting
the Amplitude .................... 22
4.4 Setting the Offset ........................... 23
4.5 Setting the Duty
(Pulse Wave Output Only) ............. 24
4.6 Setting the Phase ........................... 25
4.7 Setting the Output to ON or OFF .. 26
4.8 Setting Behavior When Output
is OFF .............................................. 27
Contents
U8793A981-02
10
9
8
7
6
5
4
3
2
1
Appx.
Ind.
8
www. .com
information@itm.com 1.800.561.8187