29
5
Setting Pulse and Pattern
Output (MR8791)
This section describes the settings that are available when an MR8791 Pulse Generator Unit is
selected on the Generator screen (signal generation settings screen) (p.15).
5.1 Setting the Mode
1
2
1
Select the
[Mode]
setting.
2
Press a function key (
F1
to
F5
) or select a button with the mouse.
Pulse
Outputs a continuous pulse waveform. (p.30)
The frequency and duty can be set separately for each channel.
Pattern
Outputs a user-edited pattern. Patterns are edited using the SF8000
Waveform Maker. (p.34)
Patterns are edited using the SF8000 Waveform Maker. For more information about how to edit
patterns, see 13.9 Pulse Pattern Mode (p.117).
The Pattern setting can only be selected when the Channels to use setting on the Memory
HiCorder in which the MR8791 is installed is set to the maximum number of channels. The
Channels to use setting can be con gured under Basic Setting on the STATUS screen. For
more information, see the instruction manual for the Memory HiCorder in which the unit is
installed.
5
Setting Pulse and Pattern Output (MR8791)
www.
.com
1.800.561.8187