Hioki IR4055 Instruction Manual Download

Page: 8 / 82

Safety Information

Notation

In this document, the risk seriousness and the hazard levels are
classified as follows.

DANGER

Indicates an imminently hazardous situation that will

result in death or serious injury to the operator.

WARNING

Indicates a potentially hazardous situation that may

result in death or serious injury to the operator.

CAUTION

Indicates a potentially hazardous situation that may

result in minor or moderate injury to the operator or

damage to the instrument or malfunction.

Indicates a strong magnetic-fi eld hazard.

The effects of the magnetic force can cause

abnormal operation of heart pacemakers and/or

medical electronics.

Indicates prohibited actions.

Indicates the action which must be performed.

Additional information is presented below.

Summary of Contents for IR4055



















































































Search results

Summary of Contents for IR4055

Reviews:

Related manuals for IR4055

Brands by name

Popular brands

Hioki IR4055, Instruction Manual

Search results

Summary of Contents for IR4055

Reviews:

Related manuals for IR4055

Brands by name

Popular brands