manualshive.com logo in svg

Hioki IR4053, Instruction Manual, Page: 16 / 88

Share
Download
Hioki IR4053 Instruction Manual Download Page 16

10

Operating Precautions

Installing the instrument

 WARNING

Installing the instrument in inappropriate locations 

may cause a malfunction of instrument or may give 

rise to an accident. Avoid the following locations.

 •

Exposed to direct sunlight or high temperature

 •

Exposed to corrosive or combustible gases

 •

Exposed to a strong electromagnetic field or 

electrostatic charge

 •

Near induction heating systems (such as high-

frequency induction heating systems and IH 

cooking equipment)

 

•

Susceptible to vibration

 •

Exposed to water, oil, chemicals, or solvents

 •

Exposed to high humidity or condensation

 •

Exposed to high quantities of dust particles

 CAUTION

Do not place the instrument on an unstable table or an 

inclined place. Dropping or knocking down the instrument 

can cause injury or damage to the instrument.

Precautions when transporting the instrument

During shipment of the instrument, handle it carefully so that it is not 
damaged due to a vibration or shock.

HIOKI IR4057B961-00

Summary of Contents for IR4053

























































































Reviews:

No comments