Hioki HITESTER 3184, Instruction Manual

Page: 34 / 42

24
―――――――――――――――――――――――――――――――――――――――
Chapter 5 3184-02 GP-IB Specifications
―――――――――――――――――――――――――――――――――――
Address 54321 Address 54321 Address 54321
0 00000 11 01011 21 10101
1 00001 12 01100 22 10110
2 00010 13 01101 23 10111
3 00011 14 01110 24 11000
4 00100 15 01111 25 11001
5 00101 16 10000 26 11010
6 00110 17 10001 27 11011
7 00111 18 10010 28 11100
8 01000 19 10011 29 11101
9 01001 20 10100 30 11110
10 01010
NOTE
5.7 Usage Precautions
(1) Address setting
The GP-IB address for the device with this interface is set
using the rear panel DIP switch. Any address 0 thru 30
not used by another device in the system can be used.
The ON side of the switch represents "1", and the OFF
side "0". Addresses are set using the five right switches
as shown in the following table.
The device address is read into the system when the
power turned ON.
Consequently, whenever address
changes are made, power must be turned OFF, then back
ON for the new address to be effective.