Hioki CM4371-50, Instruction Manual

Page: 56 / 124

50
Wireless communications function
Using the wireless communications function
1
Connect the Z3210 Wireless Adapter (option) into the instrument. (p. 20)
2
Install GENNECT Cross on your mobile device.
3
Turn on the instrument.
4
Enable the wireless communications function.
When the instrument is turned on for the first time after the Z3210 has been installed, the wireless
communications function will be enabled.
Off
(Default
setting)
Hold down for 1 s.
appears:
Wireless communications
function enabled
Off: Wireless communications function disabled
Blinks: During wireless communications
5
Start GENNECT Cross and register the connection of the instrument.
• When GENNECT Cross is started for the first time (when there is no registered instrument), the
Instrument Settings screen appears.
• When the instrument is placed near your mobile device, its connection is registered automatically on
the Instrument Settings screen of GENNECT Cross (up to eight instruments).
• Wait for 5 to 30 s until the connection of the instrument is registered after turning on the instrument. If
the connection of the instrument is not registered after 1 minute has elapsed, restart GENNECT Cross
and the instrument.
6
Select a measurement function to perform measurement.
HIOKI CM4371C961-00