Hioki 9603-01, Instruction Manual

Page: 17 / 32

9
_____________________________________________________________________________________________
3.5 Zero adjustment
______________________________________________________________________________________________
NOTE
･ If the value does not become "0" even if you perform zero adjustment, try moving
the position of the cable.
･ The zero point may differ depending on the rotation frequency, even if no torque
is applied to the torque sensor. Perform zero adjustment after you have set the
required rotation speed.
･
After zero adjustment, do not move the cable. This could disturb the
zero point.
3.5 Zero adjustment
A numerical value may be displayed even if no torque is generated by the
torque sensor or connection cable. If this happens, perform zero adjustment.
1. Make sure that no torque is applied to the torque sensor.
2. Press the
SHIFT
key.
3. Press the key for the current range.