manualshive.com logo in svg

Hioki 8860-50, Instruction Manual

Share
Download
Hioki 8860-50 Instruction Manual Download Page 234

8.14  Searching a Waveform

222

Any location within measured waveform data that satisfies the search criteria
can be found and displayed. Search criteria can be specified as trigger criteria,
peaks and times.

Search markers are placed wherever search criteria are satisfied. Also, A/B cur-
sors can be moved to the location of a search mark, and any other mark (e.g.,
event marks, (p. 231)) can be inserted. 

8.14 Searching a Waveform

Trigger Search

(p. 223)

Specify trigger criteria to 
find locations that meet 
those criteria.

 *1

 *2

*1.

Memory wave-

form only

*2. 

Measurement 

waveform only

Peak Search

 (p. 229)

Select the maximum, 
minimum, local maxi-
mum or local minimum 
location to find.

 *1

 *2

Time Search

 (p. 228)

Specify any time to lo-
cate on the waveform.

FN

1

2

F7

Press the 

FUNCTION MODE

 key to enable the

FN mode, then press

 F7

 

[Search]

. 

The SEARCH dialog appears.
Press the 

ESC

 key or the 

F8

 

[Close] 

key to close

the dialog.

The [SEARCH] dialog box appears.

(FN: FUNCTION MODE)

Waveform display

Numeric display

Search 

Markers

Set search criteria.

Select the search type.

(Example of Trigger 
Search settings)

A cursor can be moved to a found
search location.

S

Summary of Contents for 8860-50











































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands