Hioki 3640-20, Instruction Manual, Page: 27 / 40

17
_____________________________________________________________________
3.3 Setting by COMMUNICATION BASE
______________________________________________________________
NOTE
Comment, recording mode, measurement channel, range and
alarm setting are only available in 3640-20 setting items.
Personal computer, COMMUNICATION BASE and 3640-20
must be connected during setting.
Common settings are available to be set in '3911, 3912 setting
items'. This enables 3640-20 and COMMUNICATION BASE
settings.
3640-20 settings in application software
COMMUNICATION UTILITY packaged with
COMMUNICATION BASE are as follows.
Go to 'Communication' on the menu bar in
COMMUNICATION UTILITY and select 'Set measurement
condition'. When measurement condition setting window is
open, select '3640-20 setting items' to set settings.