Hioki 3640-20, Instruction Manual

Page: 17 / 40

7
_____________________________________________________________________
2.2 Power Save Function
______________________________________________________________
Sleeping......
NOTE
See COMMUNICATION BASE instruction manual to connect
logger and to install application software. To use application
software, see operation guide.
2.2 Power Save Function
Display window is automatically turned off in
approximately 15 seconds after last key entry. (Sleep)
However, while recording,
REC
/ / mark shows each
conditions.
Press any button to turn display on to display measurement
value or to set settings.
Note when interval setting display is on, sleep does not
engage with no button press.
Initially, power save function is on. To turn off power save
function, follow the instructions below.
When power save function is off, maximum continuous
duration is approximately 10 days.
1. Connect logger, COMMUNICATION BASE and
personal computer.
2. Start up application software packaged with
COMMUNICATION BASE.
3. Go to Communications on the menu bar and select
Power Save Options. Choose Off to turn off power save
function.