Hioki 3554, Instruction Manual

Page: 55 / 168

47
3.5 Determining Battery-wear Judgment Values
索引
4
3
2
1
7
6
5
10
9
8
M
eas
u
re
m
en
t
4.
Hold the measurement values by pressing key or
the PRESS button on the remote control switch.
5.
Use these measurement values to determine battery
wear judgment values.
As a battery wears out, in general its internal resistance
will grow to approximately 1.5 - 2 times (reference val-
ues) that of a new or good battery. Note that this varies
by manufacturer and model of battery. (
⇒
p.13)
In this example, the internal resistance caution value (up-
per limit no. 1) has been set at 0.6 m
Ω
and the internal re-
sistance warning value (upper limit no. 2) at 0.8 m
Ω
, and
the voltage caution value (lower limit) has been set at 1.8 V.
OR
Stabilizing
measurement values (
⇒
p.73)
Storing measurement
values Measurement values can be
stored by pressing key
while the values are being
held.(
⇒
p.44)
Loading stored data to
a personal computer (
⇒
p.103)
Configuring threshold
values and judging bat-
tery wear Based on these wear judg-
ment values, threshold values
can be configured for judging
battery wear.(
⇒
p.13)