Hioki 3256-50, Instruction Manual

Page: 34 / 54

3.5 Auto Power Save Function
30
Recovery from Power Save mode:
Turn off the function selector. In the current mea-
surement, disconnect the test leads from the termi-
nals and turn off the function selector.
Canceling the Auto Power Save function:
Turn on the measure-
ment product while press-
ing the
REC•MEMO
button.
(Hold down the button
until the beeping sound is
generated.)
The Auto Power Save function is disabled until the
measurement product is turned off (APS is turned
off).
3.5 Auto Power Save Function
Functions All functions
Description Approximately 10 minutes after completing final
operation, the measurement product automati-
cally enters Power Save mode. When the mea-
surement product is turned on, it automatically
enters Auto Power Save mode ("APS" lights up).
• In Power Save mode, the LCD is blank but power
is supplied to the measurement product.
• To avoid battery depletion, turn the function
selector OFF after use (the Auto Power Save
feature consumes a small amount of current).
After the measurement product exits Power Save
mode, all conditions are reset. If the measurement
product is to be used for an extended period, Auto
Power Save mode should be canceled in advance.
REC•MEMO