Hinux SE828A, User Manual

Page: 9 / 14

Attention:
1. An unique ID code is given to each Detector. A corresponding ID
code is set in the control unit, referring the location of the tire in
the vehicle. The control unit receives and decoding the signals
from each Detector when the two ID codes match with each other.
Otherwise, the control unit may ignore or read by mistake the
message sent by the Detector. The ID code is matched with a
suggested tire location in the sale packaging. It is recommended
to install the Detector to designated tire in the initial installation.
Make a record when replacing the tire. In case the Detector is
removed to a different tire location in the tire replacement,
resetting the ID code for each Detector in the control unit is
required. For the details please refer to the Tire Replacement
Record and the related instructions here after.
2.
If tire pressure is 25% lower, or 25% higher, than the rated
pressure, the system will give an alarm. So please set the rated tire
pressure according to the driver's manual, otherwise it may make
a false alarm or fail to give an alarm.
3.
At the start of each driving course, the pressure and
temperature of each tire will climb up for a stage. Generally the
pressure rise is associated with the temperature rise and should
not exceed 0.4Bar usually.
4.
The sound alarm can be shut off while the problem stays
unsolved. It is recommended to check the tire and solve the
problem according to the alarm as soon as possible.
5. When battery logo appears for a Detector, you need to contact
your maintenance provider for a replacement of the Detector at
your own expenses.
6. In order to save the power, please close the power switch or pull
out the power cord if do not use the system for long time.
7. Ask the professional technicians for the replacement of the
Detectors.
8. Don't pour any liquid, such as tire repairing liquid, into the tires
so as to keep the Detectors away from the possible damages.
9.
This system is designed to monitor the pressure and
temperature of the working tires, which to alarm the driver on the
enlisted abnormal conditions. However, it is not able to settle the
problems by itself. When an alarm is triggered, the driver should
check out and solve the related problem as soon as possible, to
eliminate the potential dangers.
10. The Parking Assistant System (PAS) can only be served as an
auxiliary device to the reversing driving. It can not guarantee the
safety. The driver should ever drive with care and attentions.