Hinux SE828A, User Manual

Page: 8 / 14

6. When dismounting the tires with Detectors please
pay attention to the position of the inflating valve
in order to avoid damages of the Detectors.
!
Control Unit Installation Guide
1 Take the cover strip off from the adhesive on the
bottom of the control unit, and fix the control unit to a
proper position on the driver's panel. Or you can install
the control unit to the window (intake) of the air-
conditioner. Adjust the position carefully for the best
view of the driver.
2 Two power supply modes are optional to this
system. The system can take the cigarettes lighter
socket as its power source. The Control Unit can be
connected to the cigarettes light socket with a specially
designed power cord. No installation is required under
this mode. However, the system should be plugged out
off the socket when not in use, to avoid possible
storage battery failure caused by excessive battery
consumming.
Another power supply is to connect the system to
the igniter of the vehicle with wires. The installation
needs to be done by professional technicians. Under
this power mode, the system will be turned on and off
simultaneously with the vehicle.