4. To be very careful when putting the tire back to wheel,
to avoid possible damage on the Detector.
5. After pumping up the tire to an adequate pressure,
assemble tires back to the vehicle.
2. Remove the original inflating valve.
Fix the Detector on the inflating valve tightly. Be very
careful with the rubber washer. Keep the washer
flattened in order to avoid leakage.
3.
1. Dismount the tires.
Detectors Installation Guide:
Installation Guide:
Summary of Contents for SE828A
Page 13: ...Tire Replacement Record Parts List ...
Page 14: ...TPMS ...
