Hinston KB-2036, Manual

Page: 6 / 9

KB-2036 MMi – R0, All right @ Hinston Electronics Co., Ltd.
6
7/24/2020
Hinston Electronics Co., Ltd. MMi for KB-2036
○
12 to select SDA 1-6 and press rotary knob
○
12 confirm selection, display show [
31
-
12
-
19
]
and last two digit for year flashing at the moment same as it to setup middle (Month) and
first (date) two digit , press “ Set/MEM/AMS ”
○
5 button once confirm and go to “ Clock
update ” setup or press rotary knob
○
12 confirm and retune to standby
9.4.
Setup automatic clock update via radio station
Whenever device under standby, press “ Set/MEM/AMS ”
○
5 button once, display appear
[
TIME SET
] , tune rotary knob
○
12 till display show on [
CTUPDATE]
, press rotary knob
○
12
once again confirm entry clock update Setup, [
ON
] or [
OFF
] appear , tune rotary knob
○
12
to select for active or inactive clock synchronize ,press “ Set/MEM/AMS ”
○
5 button once
confirm and go to automatic display brightness setup or press rotary knob
○
12 confirm
and retune to standby
***Select for
“ ON ” that device will done clock update at the 2:00 AM every day.
9.5.
Automatic display brightness setup
Whenever device under standby, press “ Set/MEM/AMS ”
○
5 button once, display appear
[
TIME SET
] , tune rotary knob
○
12 till display show on [
AUTO DIM]
, press rotary knob
○
12
once again confirm entry clock update Setup, [
ON
] or [
OFF
] appear , tune rotary knob
○
12 to
select for active or inactive for display automatic dim ,press “ Set/MEM/AMS ”
○
5 button
once confirm and go to automatic display brightness timer setup or press rotary knob
○
12
confirm and retune to standby
***If select for
“ ON ” , display will tune dim if no any operation action
9.6.
Setup Auto dimmer timer
Whenever device under standby, press “ Set/MEM/AMS ”
○
5 button once, display appear
[
TIME SET
] , tune rotary knob
○
12 till display show on [
DT]
, press rotary knob
○
12 once
again confirm entry clock update Setup, [
ON
] or [
OFF
] appear , tune rotary knob
○
12 to
select for active or inactive clock synchronize ,press “ Set/MEM/AMS ”
○
5 button once
confirm and go to 12/24 clock format selection or press rotary knob
○
12 confirm and
retune to standby
***Select for
“ ON ” that display will auto dim for 23:00 ~ 06:00 every day.
9.7.
Select clock format
Whenever device under standby, press “ Set/MEM/AMS ”
○
5 button once, display appear
[
TIME SET
] , tune rotary knob
○
12 till display show on [
24H]
or [
12H
], tune rotary knob
○
12
to select for 12 or 24 hour clock format ,press “ Set/MEM/AMS ”
○
5 button once confirm