Hinston KB-2036, Manual

Page: 5 / 9

KB-2036 MMi – R0, All right @ Hinston Electronics Co., Ltd.
5
7/24/2020
Hinston Electronics Co., Ltd. MMi for KB-2036
6.3.
Press button “Stop /MO/ST ”
○
4 once to stop playing, press rotatory knob
○
12 once to play
6.4.
When phone ringing, Green indicator “ Call ” flashing, press rotatory knob
○
12 once to pick
up call, during ringing long press rotatory knob
○
12 once will reject call
6.5.
Device will mute under conversation till take-up call
7. Use Auxiliary
7.1.
Connect source device like Smart phone, MP3-player … etc. to input port AUX
○
14 ,
7.2.
Press “ Power Button ”
○
1 Power on device, press button
○
3 select operation mode to AUX,
display will appear [
Aux
].
7.3.
Control source device to play music
7.4.
Rotate Rotary knob
○
12 then set output to comfortable level.
7.5.
if necessary, press Rotary knob
○
12 once when playing will make device to be quite, or press
“ Mute ” button on RC unit
8. Use LED down light
8.1.
Under any mode, long press “ DIM/Light ” button
○
9 once will tune on light, do it again tune
off
8.2.
When tune on light, will auto off after 120 minutes
9. Set up device
9.1.
Set up clock
Whenever device under standby, press “ Set/MEM/AMS ”
○
5 button once, display appear
[
TIME SET
] , press Rotary knob
○
12 once, display show on HH:MM and first two digit (hour
value) flashing, adjust it by Rotary knob
○
12 and press once confirm when done, second
two digit flashing at the moment, same as hour setup to input minute value
9.2.
Setup Date
Whenever device under standby, press “ Set/MEM/AMS ”
○
5 button once, display appear
[
TIME SET
] , tune rotary knob
○
12 till display show on [
DATE SET]
, press rotary knob
○
12
once again confirm entry Date Setup, last two digit for year flashing at the moment, tune
rotary knob
○
12 for right value and press rotary knob
○
12 confirm , same as it to setup
middle (Month) and first (date) two digit , once done, press “ Set/MEM/AMS ”
○
5 button
once confirm and go to SDA setup or press rotary knob
○
12 confirm and retune to standby
9.3.
Setup SDA
Whenever device under standby, press “ Set/MEM/AMS ”
○
5 button once, display appear
[
TIME SET
] , tune rotary knob
○
12 till display show on [
sda SET]
, press rotary knob
○
12
once again confirm entry SDA Setup, [
SDA 1
] appear (For example SDA1), tune rotary knob