11
One more device controlling the movements of the aerial part of the machine is the electronic load
sensor. A sensor located under the basket controls the load and checks that it is lower than the max.
one foreseen for the machine and selected by the operator.
In case the max. allowed weight was
overcome
(120kg o 200 kg), the load sensor under the basket
sends a signal to the circuit board located near the basket, and the machine immediately stops. On
the control panel the red flashing lamp “load sensor lamp” lights, emitting an intermittent acoustic
signal.
2.3 Emergency stop
The Gold Lift aerial platform is equipped with 2 emergency stop buttons: one is on the control
panel and the other one is on the undercarriage part, near the valve-block that controls the aerial
part.
If you use the emergency buttons to stop the machine when the arm is closed, an intermittent
acoustic signal warns that the engine key is in the ON position.
2.4 Emergency descend.
The machine has been designed taking into account possibile emergency situations such as
mechanic failures, electric failures, illness of the operator, etc. In all these cases it is possibile to
act/intervene
on the machine both from the basket and from the ground in order to bring the
machine back in the transport configuration, or to be able to assist the operator/s inside the basket.
Below are indicated the intervention procedures.
NOTE: We remind you that while the machine is working, the presence of people of the
staff on the
ground
is compulsory.
Summary of Contents for GOLD LIFT 1470
Page 1: ...Technical Course GOLD LIFT 1470 ...
Page 3: ...3 ...
