Hino J05E-TH, Workshop Manual

Page: 172 / 278

LUBRICATION
12–12
6. Inspection of clearance betweeen outer diameter of driven
gear shaft and inner diameter of driven gear bushing
(1) Measure the outer diameter of the driven gear shaft using
a micrometer and measure the inner diameter of the
driven gear bushing using a cylinder gauge.
(2) Calculate the difference between the outer diameter of the
driven gear and the cylinder block hole diameter. If it is
beyond the service limit, replace the oil pump assembly.
7. Inspection of clearance betweeen outer diameter of driven
gear shaft and inner diameter of driven gear bushing
(1) Measure the outer diameter of the driven gear shaft using
a micrometer and measure the inner diameter of the
driven gear bushing using a cylinder gauge.
(2) Calculate the difference between the outer diameter of the
driven gear shaft and the inner diameter of the driven gear
bushing. If it is beyond the service limit, replace the oil
pump assembly or the driven gear bushing.
SAPH311991200024
Measuring area
Standard value
(mm{in.})
Outer diameter of driven gear
shaft
18{0.7087}
Cylinder block hole diameter 18{0.7087}
SAPH311991200025
Standard value (mm{in.})
0.030 - 0.075
{0.0012 - 0.0030}
SAPH311991200024
Measuring area
Standard value
(mm{in.})
Outer diameter of driven gear
shaft
18{0.7087}
Inner diameter of driven gear
bushing
18{0.7087}
SAPH311991200026
Standard value (mm{in.}) Service limit (mm{in.})
0.040 - 0.083
{0.0016 - 0.0033}
0.15{0.00059}