Quick Start Guide – Blaze EZ
7
You may copy and organize documents, media, DAISY books
and scanned images in whatever way makes the most sense to
you. The Blaze EZ will locate playable content no matter where it
resides on the disk and index it and make it available for the
associated programs.
6. Powering On/Off
To power on the Blaze EZ, press and hold the Power button for 2
seconds. The first time you insert the battery or connect AC
power to the Blaze EZ, the unit automatically boots with a short
beep followed by a musical flourish with "HIMS" spoken. After
this, progress beeps are heard, followed by the power on sound.
Next, the unit announces, "Scanning disk" and the unit scans the
internal flashdisk as well as any storage device currently
connected for content playable by Blaze EZ. As stated in the
previous section, it is not necessary to place content in any set
folder structure as this process will scan and index all playable
content on all storage devices and make it available for its
associated program. After a few seconds, the unit announces
"Scanning complete".
You are placed at the Home Menu, described in the next section.
To power off Blaze EZ, press and hold the Power button again
for 2 seconds. The power down sound is heard, and the unit is
powered off.
After the initial boot sequence described above, you can power
the unit on and off quickly by pressing and holding the “Power”
button and the unit will power on at the Home menu. However, if
the battery is depleted, or the unit is reset, the Blaze EZ will go
through the more lengthy boot process described above.
