![background image](http://html1.mh-extra.com/html/hilti/vc-300-17-x/vc-300-17-x_manual_2136503025.webp)
English
21
Trouble or fault
Possible cause
Action to be taken
The vacuum turbine doesn’t
start after cleaning the waste
material container.
The sensors are clogged with dirt.
▶
Check the container level
monitoring system. → page 20
Suction power drops.
The suction nozzle, tube, hose or
the filter are blocked.
▶
Remove the blockage.
The filter is clogged.
▶
Change the fabric dust bag.
Remove the filter cover.
▶
Close the filter cover.
The drainage hose leaks.
▶
Check the drainage hose for
leakage.
Dust is blown out of the appli-
ance.
The filter is fitted incorrectly.
▶
Change the fabric dust bag.
The automatic filter cleaning
system doesn’t work.
The suction hose is not connected.
▶
Connect the suction hose.
The appliance switches it-
self off or on inadvertently or
static electricity discharges
through the user.
Electrostatic charge is not
conducted away – the
appliance is connected to an
unearthed/ungrounded power
outlet.
▶
Connect the appliance to an
earthed/grounded power outlet
and use an antistatic suction
hose.
The appliance doesn’t start or
switches itself off after a short
time.
The water level cut-out is acti-
vated.
▶
Clean the sensors and the
area around the sensors with a
brush.
The motor doesn’t restart.
The mains circuit breaker has been
tripped.
▶
Reset the circuit breaker.
▶
Find the reason for the overload
current if the circuit breaker
trips again.
The waste material container is full.
▶
Switch the appliance off and
empty the waste material
container.
The motor overheating protection
cut-out has been activated.
▶
Switch the appliance off and
allow it to cool down for about
5 minutes.
▶
If the motor doesn’t start, return
the appliance to
Hilti
Service.
The motor is repeatedly switched
off by its thermal cut-out.
▶
Clean the air vents carefully
using a dry brush.
The motor doesn’t run when
set to “AUTO”.
The appliance is faulty or is not
correctly plugged in.
▶
Make sure that the supply
cord plug is fully plugged in
and check that the appliance
functions correctly.
10 Disposal
Most of the materials from which
Hilti
products are manufactured can be recycled. The materials must be
correctly separated before they can be recycled. In many countries, your old tools, machines or appliances
can be returned to
Hilti
for recycling. Ask
Hilti
Service or your Hilti representative for further information.
In accordance with the European Directive on waste electrical and electronic equipment and its implemen-
tation in conformance with national law, electric tools or appliances that have reached the end of their life
must be collected separately and returned to an environmentally compatible recycling facility.
▶
Do not dispose of electric appliances together with household waste.
Drilling slurry
Disposal of drilling slurry directly into rivers, lakes or the sewerage system without suitable pretreatment
presents environmental problems.
▶
Ask the local public authorities for information about current regulations.
Printed: 04.09.2017 | Doc-Nr: PUB / 5372310 / 000 / 01
Summary of Contents for VC 300-17 X
Page 2: ...1 Printed 04 09 2017 Doc Nr PUB 5372310 000 01...
Page 3: ...2 3 4 5 Printed 04 09 2017 Doc Nr PUB 5372310 000 01...
Page 4: ...6 Printed 04 09 2017 Doc Nr PUB 5372310 000 01...
Page 60: ...56 Nederlands Printed 04 09 2017 Doc Nr PUB 5372310 000 01...