![background image](http://html1.mh-extra.com/html/hilti/vc-20-um/vc-20-um_original-operating-instructions_2136496027.webp)
*224936*
224936
English
23
6.8
Emptying the waste material container when no dust bag is fitted (picking up liquids)
1. Disconnect the supply cord plug from the power outlet.
2. Lift the vacuum cleaner top section away from the waste material container and place it on a level surface.
3. Grip the waste material container by the recess provided and empty it by tipping out the contents.
4. Clean the edge of the waste material container with a cloth.
5. Fit the vacuum cleaner top section onto the waste material container and close the two catches.
7
Care and maintenance
7.1
Care and maintenance of the appliance
WARNING
Electrical hazards.
Improper repairs to electrical parts may lead to serious injuries.
▶
Electrical parts may be repaired only by trained electrical specialists.
▶
Keep the appliance, especially its grip surfaces, clean and free from oil and grease. Do not use
cleaning agents containing silicone.
▶
Never operate the vacuum cleaner when the air vents are blocked. Clean the air vents carefully using a
dry brush. Do not permit foreign objects to enter the interior of the appliance.
▶
Clean the outer surfaces of the appliance with a slightly damp cloth at regular intervals. Do not use a
spray system, pressure jet washer or running water for cleaning as this may negatively affect the electrical
safety of the appliance.
7.2
Checking the container level monitoring system
1. Engage the wheel brakes so that the vacuum cleaner stands securely.
2. Disconnect the supply cord plug from the power outlet.
3. Open the two catches.
4. Lift the vacuum cleaner top section away from the waste material container and place it on a level surface.
5. Check the cut-out contacts and clean them with a brush if necessary (if dirty).
6. Check the seal at the vacuum cleaner top section and clean it with a cloth if necessary.
7. Fit the vacuum cleaner top section onto the waste material container and close the two catches.
7.3
Changing the filter element
1. Disconnect the supply cord plug from the power outlet.
2. Open the filter cover catches.
3. Open the filter cover.
4. Carefully remove the filter element, gripping it at the areas provided in the holder.
5. Clean the sealing surface with a cloth.
6. Fit the new filter element.
7. Close the filter cover by flipping the cover catch forward.
8. Close the filter cover catch.
7.4
Checks after cleaning and maintenance
1. After cleaning or carrying out maintenance, check that the vacuum cleaner is assembled correctly and
that it functions faultlessly.
2. Test each of the functions.
8
Transport and storage
8.1
Transport
Do not attempt to carry the device when it is full of waste material.
Do not attempt to crane-lift the device.
▶
Remove the power conditioner and all loose accessory tools from the cradle.
▶
Empty the device before carrying it to another location.
▶
Do not tilt the device or transport it lying on its side after using it to pick up liquids.
Summary of Contents for VC 20?UM
