![background image](http://html1.mh-extra.com/html/hilti/te-706/te-706_operating-instructions-manual_2136227016.webp)
13
en
4. Technical data
Power tool
TE 706 / TE 706-AVR
Rated power input
Rated voltage
Rated current
Mains frequency
50–60 Hz
Weight as per EPTA-Procedure
01/2003
7.9 kg
Dimensions (L
×
W
×
H)
560
×
125
×
250 mm
Chuck
TE-Y (SDSmax)
Hammering speed under load
2760 blows/min
Single impact energy
6–10 joules
Chiseling performance in
medium-hard concrete
750 cm
3
/min
Double insulated (in accordance
with EN 60745)
Protection class II
Z
1200 W
100 V
12.3 A
1200 W
110 V
11.1 A
1180 W
120 V
9.9 A
1180 W
127 V
9.3 A
1200 W
220 V
9.0 A
1200 W
230 V
8.7 A
1200 W
240 V
8.6 A
Noise and vibration information (measured in accordance with EN 60745):
Typical A-weighted sound power level:
TE 706
101 dB (A)
TE 706-AVR
98 dB (A)
Typical A-weighted sound pressure level:
TE 706
90 dB (A)
TE 706-AVR
87 dB (A)
For the given sound power level as per EN 60745, the tolerance is 3 dB.
Wear ear protection!
Triaxial vibration value (vibration vector sum)
measured in accordance with EN 60745-2-6
Chiselling, (a
h, Cheq
): TE 706
9.0
m/s
2
TE 706-AVR
5.5 m/s
2
Uncertainty (K) for triaxial vibration value
1.5 m/s
2
Right of technical changes reserved.
-NOTE-
The vibration emission level given in this information sheet has been measured in accordance with a standardised
test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assess-
ment of exposure. The declared vibration emission level represents the main applications of the tool. However if
the tool is used for different applications, with different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total working period. An estimation of the
level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working
period. Identify additional safety measures to protect the operator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm, organisation of work patterns.
Printed: 08.07.2013 | Doc-Nr: PUB / 5071188 / 000 / 01