![background image](http://html1.mh-extra.com/html/hilti/te-6-cl/te-6-cl_original-operating-instructions_2136309015.webp)
*2266071*
2266071
English
9
6
Preparations at the workplace
CAUTION
Risk of injury!
Inadvertent starting of the product.
▶
Unplug the supply cord before making adjustments to the power tool or
before changing accessories.
Observe the safety instructions and warnings in this documentation and on
the product.
6.1 Fitting the side handle
CAUTION
Risk of injury!
Loss of control over the rotary hammer drill.
▶
Check that the side handle is fitted correctly and tightened securely.
Check that the clamping band is engaged in the groove in the tool.
1. Release the side handle clamping band by turning the handle grip.
2. Slide the side handle clamping band over the chuck from the front and
into the recess provided.
3. Bring the side handle into the desired position.
4. Tighten the side handle clamping band by turning the handle grip.
6.2 Fitting the depth gauge
1. Press and hold down the release button on the side handle.
2. Slide the depth gauge from the front into the opening provided in the side
handle. Adjust the depth gauge to the desired drilling depth.
3. Release the release button.
▶
The depth gauge is locked.
6.3 Fitting the accessory tool
Lightly grease the connection end of the accessory tool.
Use only genuine
Hilti
grease. Using the wrong grease can result in
damage to the tool.
1. Push the accessory tool into the chuck as far as it will go, turning it and
applying light pressure until it engages with an audible click.
2. After fitting the accessory tool, grip it and pull it in order to check that it is
securely engaged.
▶
The product is ready for use.
Summary of Contents for TE 6-CL
