![background image](http://html1.mh-extra.com/html/hilti/sr-6-a22/sr-6-a22_manual_2136411014.webp)
8
English
2186515
*2186515*
▶
Do not use dull or damaged blades. These cause increased friction and
present a high risk of the saw blade binding or kicking back.
▶
Before beginning work, check the working area for concealed electric
cables or gas and water pipes. External metal parts of the power tool
can become live, presenting a risk of electric shock, if you accidentally
damage an electric cable.
▶
Secure the workpiece in a sturdy holder. Never hold the workpiece with
your hand or across your leg.
▶
Switch the product on only after bringing it to the working position.
▶
When working with the power tool, always guide it away from your body.
▶
Apply only moderate pressure and cut at an appropriate speed, especially
when cutting large-diameter pipes. This will help to prevent the power
tool overheating.
▶
Before cutting through pipes, make sure that they are empty of medium.
Drain the pipes if necessary.
▶
When cutting through pipes, hold the power tool above the level of the
pipe you are cutting through.
▶
The power tool is not protected against ingress of moisture. Liquid
running out of a pipe can cause a short circuit in the power tool.
▶
Never cut into unknown materials and make sure the path of the saw is
free of obstructions above and below the workpiece.
▶
The power tool can kick back if the saw blade comes into contact with
an obstructing object.
▶
Wear protective gloves also when changing the accessory tool. Touching
the accessory tool presents a risk of injury (cuts or burns).
▶
Always remove the battery when the power tool is not in use, before
maintenance, before changing accessory tools and in preparation for and
throughout transport.
▶
Engage the transport lock before storing or transporting the power tool.
▶
Comply with the manufacturer's instructions for handling and storing saw
blades.
▶
The user and persons in the vicinity must wear suitable protective goggles,
a hard hat, ear defenders, protective gloves and light respiratory protection
while the power tool is in use.
▶
Always use a saw blade of appropriate length. The saw blade must over
the workpiece while the complete Hubs stroke.
▶
Take breaks between working and do relaxation and finger exercises to
improve the blood circulation in your fingers.
▶
Do not look directly into the light source (LEDs) of the power tool and do
not aim the beam at other persons’ faces. Risk of dazzling or eye damage.
▶
Flying fragments can injure the body and eyes. Wear your personal
protective equipment and always wear protective glasses and protective
gloves.
Summary of Contents for SR 6-A22
