Hilti SR 6-A22, Manual

Page: 15 / 76

*2186515*
2186515 English 9
▶
If work involves break-through, always secure the area on the side
opposite where the work is carried out.
2.5 Battery use and care
▶
Observe the special guidelines applicable to the transport, storage and
use of Li-ion batteries.
▶
Do not expose batteries to high temperatures, direct sunlight or fire.
▶
Do not disassemble, crush or incinerate batteries and do not subject them
to temperatures over 80 °C.
▶
Do not use or charge batteries that have suffered mechanical impact,
have been dropped from a height or show signs of damage. In this case,
always contact your Hilti Service .
▶
If the battery is too hot to touch it may be defective. Put the battery in
a place where it is clearly visible and where there is no risk of fire, at an
adequate distance from flammable materials. Allow the battery to cool
down. If it is still too hot to touch after an hour, the battery is faulty.
Contact Hilti Service .
3 Description
3.1 Product overview 1
@
Blade holder
;
Mount for cutting assist
=
Folding scaffold hook (acces-
sory)
%
Safety lock
&
Control switch
(
Rear grip
)
Battery state of charge indica-
tor
+
Battery release button
§
Battery
/
Attachment eye for lanyard
:
Front gripping area with lock-
ing button for contact shoe
∙
Saw blade release lever
$
Suction hose connector (ac-
cessory)
£
Contact shoe
|
Saw blade
¡
Cutting assist (accessory)
3.2 Intended use
The product described is a cordless reciprocating saw. It is designed for
cutting wood, wood-like materials, metals and plastics.
The product is designed for two-handed operation.
▶
Use only Hilti lithium­ion batteries of the B 18 / B 22 series with this
product.
▶
Use only Hilti battery chargers of the C4/36 series with these batteries.
3.3 Possible misuse
▶
Do not use the power tool to cut bricks, concrete, cellular concrete,
natural stone or tiles.