Hilti SIW 22T-A 1/2", Original Operating Instructions

Page: 16 / 192

10 Français 409099
*409099*
Trouble or fault Possible cause Action to be taken
The control switch cannot be
pressed.
The forward / reverse selector
switch is in the middle position.
▶
Set the forward / reverse
selector switch to forward or
reverse rotation. → page 7
Speed of rotation drops con-
siderably.
Low battery.
▶
Charge the battery. → page 7
The battery is not heard to
engage.
The retaining lugs on the battery
are dirty.
▶
Clean the retaining lugs.
The battery runs low more
quickly than usual.
Very low ambient temperature.
▶
Warm up the battery slowly to
room temperature.
The tool or the battery gets
very hot.
The tool is overloaded (application
limits exceeded).
▶
Select a product that is suitable
for the intended purpose.
9 Disposal
Most of the materials from which Hilti tools and appliances are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries, your old tools,
machines or appliances can be returned to Hilti for recycling. Ask Hilti Service or your Hilti representative
for further information.
Battery disposal
Improper disposal of batteries can result in health hazards from leaking gases or fluids.
▶
DO NOT send batteries through the mail!
▶
Cover the terminals with a non-conductive material (such as electrical tape) to prevent short circuiting.
▶
Dispose of your battery out of the reach of children.
▶
Dispose of the battery at your Hilti Store , or consult your local governmental garbage disposal or public
health and safety resources for disposal instructions.
▶
Do not dispose of power tools, electronic equipment or batteries as household waste!
10 RoHS (Restriction of Hazardous Substances)
The following links take you to the table of dangerous substances: qr.hilti.com/r4265 (SIW 22T-A 1/2") and
qr.hilti.com/r2922676 (SIW 22T-A 3/4").
You will find a link to the RoHS table, in the form of a QR code, at the end of this document.
11 Manufacturer’s warranty
▶
Please contact your local Hilti representative if you have questions about the warranty conditions.
Notice d'utilisation originale
1 Indications relatives à la documentation
1.1 À propos de cette documentation
• Lire intégralement la présente documentation avant la mise en service. C'est la condition préalablement
requise pour assurer la sécurité du travail et un maniement sans perturbations.
• Bien respecter les consignes de sécurité et les avertissements de la présente documentation ainsi que
celles figurant sur le produit.
• Toujours conserver le mode d'emploi à proximité du produit et uniquement le transmettre à des tiers
avec ce mode d'emploi.