Hilti SIW 22T-A 1/2", Original Operating Instructions

Page: 11 / 192

*409099*
409099 English 5
Power tool use and care
▶
Immediately switch off the power tool if the accessory tool jams. The power tool might twist off-line.
▶
Wait until the power tool stops completely before you lay it down.
2.4 Battery use and care
▶
Observe the special regulations and instructions applicable to the transport, storage and use of Li-ion
batteries.
▶
Do not expose batteries to high temperatures, direct sunlight or fire.
▶
Do not disassemble, crush or incinerate batteries and do not subject them to temperatures over 80 °C.
▶
Do not use or charge batteries that have suffered mechanical impact, have been dropped from a height
or show signs of damage. In this case, always contact your Hilti Service .
▶
If the battery is too hot to touch it may be defective. In this case, place the product in a non-flammable
location, well away from flammable materials, where it can be kept under observation and allowed to
cool down. In this case, always contact your Hilti Service .
3 Description
3.1 Product overview 1
@
Square drive spindle
;
Forward / reverse selector switch with safety
lock
=
Control switch
%
Grip
&
Work-area light
(
Belt hook (optional)
)
Battery
+
Charge-status and fault indicator (Li-ion bat-
tery)
§
Release button with additional function
(charge status display activation)
3.2 Intended use
The product described is a hand-held cordless impact wrench. It is designed for tightening and releasing
nuts, bolts, anchors and wood screws.
The impact wrench may be used only for applications that do not require a precise/specified torque. Failure
to observe this point presents a risk of over-tightening and damage to the bolt, screw or workpiece.
• Use only
Hilti lithium­ion batteries of the B 22 series with this product.
• Use only Hilti -approved battery chargers to charge these batteries. More information is available from
your Hilti Store or from www.hilti.group