Hilti SIW 22T-A 1/2", Original Operating Instructions

Page: 14 / 192

8 English 409099
*409099*
5.1.7 Removing the accessory tool 5
SIW 22T-A
1
/
2
"
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Pull the accessory tool off the square drive spindle.
5.1.8 Installing an accessory tool 6
SIW 22T-A
3
/
4
"
CAUTION
Risk of injury through use of the wrong type of accessory tool!
▶
Use only accessory tools of the locking type.
▶
Do not use worn or damaged accessory tools.
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Remove the O-ring from the groove in the accessory tool.
3. Pull out the locking pin.
4. Set the O-ring on the product's square drive spindle.
5. Push the accessory tool on to the product's square drive spindle.
Position the accessory tool with the hole in the shank of the accessory tool aligned with the hole
in the square drive spindle.
6. Insert the locking pin into the accessory tool.
7. Then re-insert the O-ring into the groove in the accessory tool.
5.1.9 Removing the accessory tool 7
SIW 22T-A
3
/
4
"
1. Set the forward/reverse switch to the middle position or remove the battery from the power tool.
2. Remove the O-ring from the groove in the accessory tool.
3. Pull out the locking pin.
4. Remove the accessory tool from the square drive spindle of the power tool.
5. Fit the locking pin.
6. To keep it safe, fit the O-ring back on to the accessory tool.
5.2 Work
5.2.1 Switching on
▶
Press the control switch.
▶
Speed of rotation is regulated by the distance the control switch is pressed in.
5.3 Switching off
▶
Release the control switch.
6 Care and maintenance
WARNING
Risk of injury with battery inserted !
▶
Always remove the battery before carrying out care and maintenance tasks!
Care and maintenance of the tool
• Carefully remove stubborn dirt.
• Clean the air vents carefully with a dry brush.
• Use only a slightly damp cloth to clean the casing. Do not use cleaning agents containing silicone as
these can attack the plastic parts.