![background image](http://html1.mh-extra.com/html/hilti/sfl144-a/sfl144-a_operating-instructions-manual_2135797006.webp)
Symbols
Read the
operating
instructions
before use.
Volts
Return waste
material for
recycling.
Location of identification data on the appliance
The type designation and serial number can be found
on the type identification plate on the appliance. Make
a note of this data in your operating instructions and
always refer to it when making an enquiry to your Hilti
representative or service department.
Type:
Generation: 01
Serial no.:
2 Description
2.1 Use of the product as directed
The appliance is designed to be used as a source of light on construction sites.
The appliance is manufactured from high-grade, impact-resistant plastic. The battery and charger are not supplied
with the lamp.
Use only the specified type of replacement bulb.
Keep the appliance out of reach of children.
Take the influences of the surrounding area into account. Do not use the power tool or appliance where there is a risk
of fire or explosion.
The appliance may be used only in a dry environment.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
To avoid the risk of injury, use only genuine Hilti tools and accessories.
Modification of the appliance or tampering with its parts is not permissible.
2.2 Li‑ion battery charge status
LEDs light constantly
LEDs blink
Charge status C
LED 1,2,3,4
-
C ≧ 75 %
LED 1,2,3
-
50 % ≦ C < 75 %
LED 1,2
-
25 % ≦ C < 50 %
LED 1
-
10 % ≦ C < 25 %
-
LED 1
C < 10 %
-
LED 1
Battery overheated
3 Accessories
Designation
Short designation
Charger for Li-ion batteries
C 4/36, C 4/36‑ACS or C 4/36‑ACS TPS
Battery
B 144/2.6 Li‑ion
Replacement bulb
Xenon 14.4V/ 0.8A
Reflector
For the SFL 144-A
en
9
Printed: 08.07.2013 | Doc-Nr: PUB / 5135045 / 000 / 01