Hilti SFL 14-A, Operating Instructions Manual, Page: 4 / 16

2 English
Product information
Cordless lamp SFL 14-A | SFL 22-A | SFL 36-A
Generation 01
Serial no.
We reserve the right to make changes. Errors excepted.
2 Safety
2.1 Safety instructions
NOTE In addition to the information relevant to safety given in each of the sections of these operating
instructions, the following points must be strictly observed at all times.
2.1.1 Careful handling and use
▶
Use the product only when it is in technically faultless condition.
▶
Never tamper with or modify the product in any way.
▶
Keep the product out of reach of children.
▶
Do not use the product where there is a risk of fire or explosion.
▶
Replace the complete cordless lamp when the light source has reached the end of its life. The light
source in this cordless lamp is not replaceable.
2.1.2 Use and care of battery-powered appliances
▶
Observe the special guidelines applicable to the transport, storage and use of Li-ion batteries.
▶
Check that the appliance is switched off before inserting the battery.
▶
Do not expose batteries to high temperatures, direct sunlight or fire.
▶
Do not disassemble, squash or incinerate batteries and do not subject them to temperatures over 80°C
(176°F).
▶ Do not attempt to charge or continue to use damaged batteries.
▶ If the battery is too hot to touch it may be defective. In this case, place the appliance in a non-flammable
location, well away from flammable materials, where it can be kept under observation and allowed to
cool down. Contact Hilti Service after the battery has cooled down.
▶
Use only the specified batteries in the product.
Printed: 26.10.2016 | Doc-Nr: PUB / 5140725 / 000 / 07